New products, new developments

With the new S4LFT5450-292, Sill Optics presents a 650 mm scan lens that is particularly suitable for use in additive manufacturing because of the…

Sill Optics is expanding its lens series for large APS-C sensor formats with three additional color-corrected, telecentric lenses.

The success of the Sill Optics beam expanders made of high-quality fused silica and coatings over the past decades invited Sill Optics to start a new…

Sill Optics is responding to the increased demand for C-mount lenses for large sensors with a new series of telecentric lenses. 

Sill Optics has developed a 2x magnifying telecentric lens with large aperture and integrated liquid lens for focus adjustment.

Sill Optics has been developing and producing telecentric imaging lenses for over 40 years.

Funds advised by Deutsche Private Equity DPE have acquired a majority stake in Sill Optics GmbH & Co. KG, Wendelstein.

Scan Lenses for additive manufacturing.

During process observation within VIS spectrum, chromatical aberrations occur caused by the difference in laser and observation wavelength.

The thermal focus shift is typically a problem caused by optical glass lenses.

In general the rule in optics is that a large image sided NA means a small minimum spot size. So steeply focused, diffraction limited beams result in…

Sill Optics presents the new zoom beam expander S6EXZ0940-574 which is suitable for high power UV lasers at 355 nm.

UV lasers become increasingly popular among various domains in the laser industry.

Magnifying telecentric lenses occupy an intermediate position between macro lenses and microscope lenses.

To enable higher resolution for industry cameras, smaller pixels or larger sensor sizes are required.